Process of Making Bowl










Comments

Post a Comment

Popular posts from this blog

Tray

Image
   Making the tray / Partner with Rosabel Step 1 - Cut two pieces material in same size & One for each Measuring the material in a big piece and cut the round corners with the cylinder steel. Then mark the inner size with the scribe.     Step 2 - Making a wood template as the inner size.     Step 3 - Hammer the edges Care about with the round corners.      Step 4 - Take the wood template off    Step 5 - Cut the extended corners    Step 6 - Match with partner's half one Step 7 - Adjust & Make it match perfect  Perfect !
Read more

Assignment 3 - Tutorial & Reflection

Image
Tutorial - Blister Tools you need:   Nylon Mallet (with Edge, with Flat End, with Round) Steel Planishing Hammer Steel Dolly Sand Bag Scribe Tin Snips Files 0.5 to 1 mm thick aluminum sheet Wood Template with shape(blister) 4 set screws and nuts S tep 1 - Laser cutting wood templates and get two pieces of the same shape. Drill four holes at the corner for screws. Step 2 - Cutting & smooth the wood template. Using the files to smooth the edge and offer a good space for the aluminum.  Tips: Careful using the files and avoid changing the shape. Step 3 - Cut a suitable piece of aluminum, and put it between two pieces of wood. Lock three pieces together. Step 4 - Start to hammer the aluminum. Put the sand bag underneath and allow the aluminum shape can go downward. Firstly, put the Nylon Mallet with Round End on the big space aluminum part, and then using ...
Read more